Tile Noob Bundle

From: $109.99

Don't have room for a dedicated tile row in your case but need some tiles? Here's everything you need to get tiles going in your rack.


Everything you need to get started.

  • 10HP Tile Carrier. Fits three tiles.
  • 6 Tile Power Adapter. Powers up to 6 tiles from a 10 or 16 pin Eurorack power supply. Includes cable.
  • Clock Divider Tile. It's CV controlled — or not — you decide.


Why wait? Fill out your first tile row now with these discounted modules.

  • Clock Multiplier Tile
  • Clock Generator Tile
  • MIDI Clock Tile
  • Tile Blank


Eurorack 1u Tile Adapter

Carries 3 1u tiles in a 10hp Eurorack space. Perfect for when you want "just a few" tiles, or to fit tiles in an existing case


In stock

Clock Divider Eurorack Tile Module

Clock Divider

Divides clock down by odd or even multiples (selectable). Middle jack can be configured as a CV input or Reset.

  • 24 (Sync24 / DIN Sync) clock inputs and outputs. 5ms pulse width. Works with any type of clock, but calculations done assuming a 24 PPQN clock.
  • Configurable for odd and even clock outs, just even clocks, or purely mathematical divisions.
  • RESET input to restart clocks with external sequencer.
  • Division ratio can be CV controlled. 0-5V range.
  • Configured through jumpers and software (restored upon startup.)

1U Tile - Single – optional

In stock

Clock Generator Eurorack Tile Module – optional

Clock Generator

Generates 24 PPQN or 4 PPQN clocks. Clock rate can be CV controlled. Has Start/Stop and tap-tempo.

  • 24 (Sync24 / DIN Sync) or 4 PPQN clock outputs. 5ms pulse width.
  • 10 to 260 BPM @ 24PPQN.
  • +5V clock/gate/tap/START/CV in and outs.
  • Start gate input to externally control clock generation. START jack is normalled to run clock generator if no jack is inserted.
  • Tap tempo through CV input jack. 5V positive trigger. Can be permanently configured for tap-tempo or on the fly. When using tap-tempo the knob adjusts the rate.
  • Can be configured to send a RESET to external sequencers.
  • Configured through jumpers and software (restored upon startup.)

Clock Multiplier Eurorack Tile Module – optional

Clock Multiplier

Creates higher rate clock signal based on input clock. Middle jack can be configured as CV input or Ratchet gate.

  • Multiplies incoming clock or trigger up to 24x.
  • 5ms pulse width on output.
  • Maximum around 300 BPM @ 24PPQN (limited by 5ms clock pulse.)
  • Ratchet gate input. Activates multiplier on a 5v positive gate, otherwise clock output mirrors input.  Normalled on when no cable inserted.
  • +5V clock and gate in and outs.

MIDI Clock Eurorack Tile Module – optional

MIDI Clock

Converts MIDI clock to 24 PPQN clock and Start/Stop.

  • 24 PPQN (Sync24 / DIN Sync) clock out. 5ms pulse width.
  • START/STOP gate out responds to MIDI START, STOP, and CONTINUE.
  • Clock out always sends a clock as long as the MIDI input is receiving a clock.
  • +5v clock and gate outs.
  • LED shows MIDI activity.


SKU: SY_2033 Categories: ,


Will be built to order if none are in stock, which may delay delivery for up to a week or longer if we’re awaiting parts. We will notify you about delivery time. Email us if you would like to know the delivery time before ordering.

10 or 16 pin Eurorack power cable included.

+12V 20ma power consumption per tile.

Additional information

Weight150 g
Dimensions16.5 × 10.5 × 8.5 cm

1U Tile - Single

Clock Multiplier Eurorack Tile Module

MIDI Clock Eurorack Tile Module