Clock Divider Tile

cvcd-tile-squareThis clock divider uses a control to select a single clock division ratio and fits in a single tile.

Features and Specs:

-12 divisions from /1 to /96 assuming 24ppqn, but can divide any clock source.
-Depth: 40mm
-Power: 10-pin Eurorack DIP
-Current: 12V:15ma
-Panel: PCB with silkscreen.
-AtTiny85 based, Arduino-compatible source code included (here).

MAP_5945 - Copy

Available DIY or Assembled

BOM:

1 100nFCeramic Disc Capacitor
1 10uF Radial Electrolytic Capacitor
1 100uF Radial Electrolytic Capacitor

1 100R Resistor
4 1K Resistors
2 10K Resistors

Atmega AtTiny85-20 DIL Microcontroller
1 2N3904 NPN Transistors
7805L TO92 5v 100ma Power Regulator
1 1n4007 Diode
1 5.6V Zener Diodes (1n4734)
1 1n4148 Diode

1 10kB Potentiometer 16mm or 9mm PCB mount
3mm LED
5×2 Header (Eurorack Power) unshrouded
2 3.5mm Kobiconn-style sockets with lugs
DIL08 Socket
Tile Panel

Build Instructions: CVClockDivider-Info-and-Build-Instructions.pdf

Buy now DIY or Assembled