New tiles now available. VCO, VCA, VCF, LFO, EG, CV and audio mixers, mults and shift/scalers — enough tiles to build a complete modular synthesizer out of just tiles!
VCO Classic
The classic analog saw oscillator.Fine tune on the front as well as the V/Octave offset and scaling trimmers.
Two inputs: V/Oct, and CV.
Covers 8 octaves. Matched transistors for low drift.
VCA
0-5V response.
Very low distortion and CV feedthrough.
VCF
A/R EG
A simple attack/release envelope generator.
Attack/Release from instantaneous to several seconds.
Log response curve.
LFO
Three oscillators. 0-5V CV out.
Frequency approximately from 20Hz to 100 seconds.
Signal Clone
Buffered multiple for any signal.
Four outs, plus one inverted out.
LED shows polarity and signal level.
MiniAudioMixer
4×1 audio mixer.
Can handle levels up to 10Vp-p, and output to 1Vp-p (line level).
CV Crossfade Mixer
Crossfade control to mix two CV signals.
Two outputs, with one inverted.
LED shows polarity and signal level.
CV Scale Offset
Shift any signal + or – by up to 10V.
Scale any signal between 0 and 10V.
Two outputs, with one inverted.
LED shows polarity and signal level.
Pedal I/O
Send audio from Eurorack to external FX pedals or units, then return effected signal back to Eurorack.
Wet/Dry control to mix original signal into effected signal.
And don’t forget our CV Touch Keyboard:
or our Clock Tiles:
Don’t have room in your rack for more rows?
Take a look at our Tile Adapter and Power Adapter.
Also available as a package.
Even less room, or want a standalone system? Check out our Tile Skiff Case.
Tiles are compatible with PulpLogic 1U Tiles.
All are also available as kits. Links to schematics and BOM on each product page.
You can find them all on our tile page: http://syinsi.com/Shop/tiles/