Posted on

Stomper Eurorack Drum Module

The Hammer of God tabletop drum module is now a Eurorack drum module. All inputs can be CV controlled (0-5V), including the built-in clock-divider. It uses standard 10 pin +12/-12 power, drawing a paltry 30mA. It’s triggered by sync-24 clock, trigger/gate, or button press. It has a handy gate output to easily (and accurately) apply…

Read more

Posted on

The PRONE CV / MIDI sequencer

One of my biggest regrets is not buying a Sequential Circuits Pro-One when I had the chance in the early nineties when they were going for a tiny fraction of what they go for now. A couple years ago I thought about finally getting one, but it was hard to justify the expense when I…

Read more

Posted on

Inkscape Eurorack Panel Design Extension

The Eurorack Panel Design Extension for Inkscape helps design Eurorack front panels for artwork or CNC/lasercutting. Select the HP, panel size calculation method, round or oval holes, and whether the hole centers should be marked. There’s two methods used for calculating the offset gap. Doepfer-style adds a fixed value (.36mm initial setting) gap on the…

Read more